Maintenance and Maintenance of Oral Liquid Filling Machine

Oral liquid filling machine is a kind of equipment specially designed for the new oral liquid easy-pulling bottle. The power is transmitted to the worm wheel axle of the reducer through the motor percutaneous pulley, and then the power is transmitted to the pulley axle, filling part and rolling cap head through the worm wheel axle through the gears. The filling part, the rolling cap and the dialing wheels move synchronously, and the power is transmitted to the bottle-feeding dialing device by bevel gears to complete the filling of oral liquid. The whole filling process has the advantages of reasonable design, simple structure and convenient operation.

Whatever kind of filling equipment, the necessary maintenance has a great effect on the service life of the equipment itself. Oral liquid filling machine is no exception. Next, we will briefly introduce it to you.

1. Because the filling machine of oral liquid is a product with high automation, we should pay attention to the uniform size of easy-to-pull bottle, bottle pad and bottle cap in the use process.

2. Before the equipment is running, it is necessary to rotate the machine with a rocking handle to see if there is any abnormality in its rotation, and then it can be driven after it is proved to be normal.

3. If it is necessary to adjust the equipment, we should pay attention to the proper use of tools. It is strictly forbidden to use too large tools or use too much force to disassemble parts to avoid damaging the parts or affecting the performance of the machine.

4. Users should regularly clean the oral liquid filling machine to ensure that there is no obvious oil stain, liquid medicine or glass debris on the machine, so as not to cause machine erosion.

5. Oral liquid filling machine should remove liquid or glass debris in time during the production process.

6. Clean all parts of the machine surface and add clean lubricating oil to the moving parts before turning over.

7. Wash the filling machine of oral liquid regularly, especially clean the place which is not easy to clean in common use or blow it with compressed air.

8. When using oral liquid filling machine, we should check whether the random technical data are complete and whether the machine is damaged in transportation, so as to solve the problem in time.

9. Rotate the machine with a rocking handle to check whether the machine is running in the right direction (counter-clockwise to the motor spindle). The machine must be protected from earthing.

10. Install and adjust the feeding and discharging components according to the outline of this instruction.